PRODUCTS

Automated Total Nitrogen/ Phosphorus/COD Analyzer (NPW-160)

  • Product Code : NPW-160

  • Maker : TOA-DKK

  • Model : NPW-160

  • Origin : Japan

Hotline: +84 24 6265 2550

+ 120°C 30 minutes pyrolysis is adopted to achieve
a sound integration with hand analysis value.
+ To test 3 items (TN, TP, COD (UV)) with a multi-wavelength
detector.
+ Compact design with simple sample and reagent measuring
unit.
+ Integrative manifold tubing, simple structure
+ To reduce measured waste liquid to 15L/month by saving
reagent
+ The heating resolver adopts an independent simple design
+ Pure water in built-in sink can test continuously for about
10 days.
+ Tubing in the back has been moved to operate from the
front.
+ CF Card can store 1 year’s data.

Meas. range:

Total nitrogen: 0 - 2 mg/L to 50 mg/L
Total phosphorus: 0 - 0.5 mg/L to 20 mg/L
COD (UV method): 0 - 2 Abs

Measuring objects: Total nitrogen (TN) density and total phosphorus (TP) and COD (UV) density in the water
Measuring method: 
+ TN: Alkaline peroxo disulfate decomposition (120°C, 30 minutes) - ultraviolet spectrophotometry
+ TP: potassium peroxo disulfate (120°C, 30 minutes) - Molybdenum blue (ascorbic acid) spectrophotometric method.
+ COD: 2 wavelength spectrophotometry (ultraviolet 254nm/ visible rays 546nm)

Measurement range:

Repeatability:

Measurement cycle: measurement / 1 hour (can set to be 1 to 6 hours)
Measurement point: 1 fluid passage
Load capacity calculation: Built-in
Display mode: Touch screen operation, switch to display year, month and date, moment, measurement value, load capacity, action state etc.
Recording mode: small built-in flash memory (1 years data storage), equipped with a printer with auto winding function.
Calibration method: To use calibration liquid for manual and auto calibration. External signals can be made use for calibration. Zero calibration is conducted automatically when COD is used for measurement.
Analog input signal: Drainage flow rate measurement value input: 4 to 20mA DC
Analog output signal:  
+ Measured value / 3 items: 4 to 20mA DC, load resistance
less than 600 Ω.
+ Load capacity / 3 items: 4 to 20mA DC, load resistance
less than 600 Ω.
Contact input signal: external measurement start signal, external calibration start signal, no sample, flowmeter maintenance is under way, contact rating: 24V DC, 0.3A
Contact output signal: 
+ Measurement value alarm (3 items), load capacity alarm (3 items), major failure, minor failure, maintenance underway, power off, preprocessing startup
+ Contact rating: 24V DC, less than 0.3A
+ AC100V, less than 0.1A
Ambient temperature and humidity: 2°C to 40°C, less than 85 % (RH)
Specimen water condition: Flow: 1 to 3L/min (about 60mL/1 measured)
Pressure: 20 to 50kPa, temperature: 2 to 40°C
Reagent consumption amount:
+ Peroxide solution: 2.6L
+ Sodium hydroxide: 0.37L
+ Hydrochloric acid: 0.45L
+ Ammonium molybdate: 0.37L
+ L- ascorbic acid:0.37L
(1 hour/ 1 measurement hour 1 month’s consumption amount)
Waste liquid amount: about 15L/month
Power supply: 100VAC±10V, 50/60Hz
Power consumption: 500VA (max), 200VA (average)
Structure: IP52, floor surface setting model
Boundary dimension: 450 (W) × 380 (D) × 1430 (H) mm (excluding water catcher)
Coating color: equivalent to Munsell 5PB8/1
Weight: about 80kg

This product is used for drainage monitoring in factories and business offices, and auto measurement of total nitrogen, total phosphorus and COD density in water quality control. 

related products

Automatic Online Heavy Metal Analyzer...

Detail

Automatic Water Quality Monitor...

Detail

Automated COD Analyzer (COD-203A)

Detail

Organic Pollution Monitor(UV Meter)...

Detail